STEIN MUSIC
Stateline
STATELINE PHONO 2
Your phono deck will gladly appreciate it. The Stateline Phono 2 is a High-quality phono preamplifier, MC and MM switchable. variable impedance settings, external power supply. Our phono preamp system consists of our Stateline Phono 2 preamp, the Stateline Phono 2 and our Stateline Phono 2 Signature version.
The Stateline Phono 2 Pre-amplifier has the following features: Discrete matched FET Input stage. Discrete single ended Mos-FET output stage. All is fully working in Class A. RIAA equalization is done passively for high frequencies and actively for low frequencies. Both RIAA networks are completely separated from each other. External raw power supply, so that no transformers which might create the smallest hum are located in the main housing. Internally, a special discretely-built ultra low noise voltage regulator with LEDs does an excellent job. The signal path is extremely short due to the use of a double sided PCB with SMD parts on one side and through-hole devices on the other. No use of any ceramic capacitors in the whole circuit. The complete board including all components is lacquered with Stein Music Maestro lacquer to optimize mechanical resonances.
MM: Input capacity switchable 0pF, 82pF, 150pF or 232 pF
MC: Input impedance switchable between 25R and 47K in 50 steps
Amplification 60dB MC, 40dB MM
Will work fine with Aventurin 6, however it suits well with every other cartridge as it is very easily universally adjustable.
STEIN MUSIC
Highline
HIGHLINE PHONO PRE
The Stein Music Phono Pre is a battery-powered preamplifier that sets an absolute standard in analog performance. Specially optimized circuits with a minimum of active components in the signal path reveal an unprecedented dynymic range in the phono signal. Designed for moving coil (MC) systems, it amplifies the signal from MC pickups to line level. Impresses with its minimalist and timeless design.
HIGHLINE PHONO PRE PRE
Based on the battery-operated High Line Phono Pre design, the High Line Phono Pre Pre works on the same principle of minimalism on active components in the signal path, as well as maximum dynamic efficiency and finesse. Designed for moving coil (MC) systems, it amplifies the signal from MC pickups to the level of Moving Magnet (MM) pickups. Impresses with its minimalist and timeless design. It has the same housing as the Phono Pre.
